SRAM offers Quarq power meter spiders to upgrade your current RED or Force AXS crankset easily. To upgrade your RED or Force AXS compatible crankset to a power meter on a Cannondale Ai-spaced frame...
See more
SRAM offers Quarq power meter-ready Force DUB cranksets compatible with Cannondale Ai frame spacing. Follow the steps below to upgrade to an eTap AXS crankset and power meter on your Cannondale Ai ...
See more
XX1 Eagle DUB power meters are NOT compatible with Trek's BB95 mountain bike standard. Most recent (2018 - current) Trek bikes have moved away from BB95 to a compatible BB92, however it is worth me...
See more
Unfortunately no. Quarq does not make a power meter spider that can be mounted to any Campagnolo crankarms.
Additionally, Campagnolo chain rings use proprietary to Campagnolo bolt circle diameters....
See more
Unfortunately no. Quarq does not offer a mountain bike power meter spider that can be mounted to the Cannondale SiSL 2 (or SI) mountain bike crank.
The SRAM XX1 Eagle power meter uses a proprietary...
See more
Unfortunately, no. The proprietary Ai offset found on some Cannondale bikes is not compatible with any Quarq power meter. The chainline is shifted at least 6mm outboard and using an XX1 Eagle power...
See more
Shimano Ultegra 6700 cranksets do not have a removable spider. Therefore a Quarq power meter cannot be mounted to the Shimano 6700 crank arms.
If you have a Shimano Ultegra 6700 crank, and wish to...
See more
Shimano Ultegra 6700 chainrings are compatible with certain 130 BCD Quarq power meters. Ultegra 6700 rings can be mounted and used with the following Quarq power meters:
Quarq DZero Carbon 130 BCD...
See more
Shimano Dura-Ace 7900 cranksets do not have a removable spider. Therefore Quarq a power meter spider cannot be mounted to the Shimano 7900 crank arms.
If you have a Shimano Dura-Ace 7900 crank, an...
See more
Shimano Dura-Ace 7900 chainrings are compatible with certain 130 BCD Quarq power meters. Dura-Ace 7900 rings can be mounted and used with the following Quarq power meters:
Quarq DZero Carbon 130 B...
See more
The Quarq DFour power meter is specifically designed to work with the Dura-Ace 9000 groupset. The DFour is sold as a chassis (power meter spider and crankarms) and takes the place of the Dura-Ace 9...
See more
The Quarq DFour91 power meter is specifically designed to work with the Dura-Ace 9100 groupset. The DFour91 is sold as a chassis (power meter spider and crankarms) and takes the place of the Dura-A...
See more
Unfortunately no. The SRAM XX1 Eagle power meter uses a proprietary crank to spider interface and can only be installed on the Quarq XX1 crank arms.
Quarq DOES NOT offer a mountain bike power mete...
See more
The Quarq for Specialized power spider is specifically designed to replace the stock aluminum or carbon spider on all 2013 - current S-Works and Fact IS carbon road crank arms.
COMPATIBLE2013-Cu...
See more
Every Quarq DZero road power meter, with the exception of the Four and DFour91, are compatible with SRAM 1X road drivetrains.
SRAM 1X Road Compatible Power Meters
SRAM Red DZero
Quarq DZero Carbon...
See more
Unfortunately no. Quarq power meters, with the exception of the DZero for Specialized power meter spider, use a different spider/crank arm interface than non-power SRAM cranks. All Quarq power mete...
See more
SRAM Red DZero and Quarq DZero HB (hidden bolt) power meters use a slightly different bolt pattern than your typical 5 bolt NHB (non-hidden bolt) design. The HB design is offered to better work wit...
See more
