Manual Zero
Perform the Manual Zero process in the AXS App or a compatible cycling computer. It may be called a 'Power Meter Calibration' (or similar) within the owner's manual of your cycling computer. The Rival spindle-based power meter should have Manual Zero performed before each ride for the best accuracy.
________________________________
Manual Zero Calibration Steps:
1)Ensure you are off the bike and unclipped from the pedals.
2)Place the drive-side crank arm in the 6 o'clock position.
3)Complete the calibration process following one of the steps below. During the calibration process, do not move or touch the crank.
- In the AXS App, press "Set Zero." Pressing "Set Zero" will complete the calibration process.
- In your cycling computer, initiate the 'calibrate' command as instructed in its owner's manual. Within 3-5 seconds, the cycling computer should indicate 'Success' and often display the Zero Offset number.
Or, watch the Rival Power Meter Calibrations video to view the Manual Zero calibration process.
________________________________
Learn more about your calibration numbers in the "What is a good Zero Offset number?" article.
NOTE: Magic Zero is unavailable on the Rival DUB-PWR spindle-based power meter.